1 1

Autel

Autel MaxiCharger A07 7.4kW Smart EV Charger – Type 2, 5m Cable

Autel MaxiCharger A07 7.4kW Smart EV Charger – Type 2, 5m Cable

$929.00 NZD
$929.00 NZD
Sale Sold out
Taxes included. Shipping calculated at checkout.

📦 Available to order — Contact us for pre-order options and delivery timeline.

This is a pre-order item. Your order will be confirmed and delivery timeline provided after we process your request.

Connected Home Charging, Made Simple

Bring convenient everyday charging to your home with the Autel MaxiCharger Single Charger A07. Designed for compatible Type 2 vehicles and suitable 230V single-phase properties, its attached 5m cable keeps charging within easy reach, while supported app and RFID access provide flexible ways to manage daily use.

Why customers choose it

  • Ready when you are — the attached 5m Type 2 cable means there is no separate charging cable to unpack each time.
  • Charge your way — use supported app or RFID access according to the supplied configuration.
  • Stay connected — built-in Wi-Fi and Bluetooth support compatible connected features and setup.
  • Built for real-world locations — the compact enclosure carries manufacturer-rated IP65 and IK10 protection, subject to appropriate positioning and installation.

Ideal for
Suitable homes, apartments and selected light-use locations with an appropriate 230V single-phase electrical supply, compatible Type 2 vehicles and suitable network coverage where connected features are required.

Professional installation required
This hardwired charger must be installed, configured, tested and certified by an appropriately licensed New Zealand electrical worker. Full electrical and protection requirements are provided in the Installation section below.

Maximum charging power is up to 7.4kW. Actual charging speed and available app, cloud, RFID or OCPP functions depend on the vehicle, site capacity, exact hardware, firmware, network, backend, account and configuration supplied. Do not apply features from other MaxiCharger models to this A07 listing.

View full details
📶
Wi-Fi + Bluetooth
Manufacturer-listed connectivity for supported functions
📱
App + RFID Access
Start charging via the Autel Charge App or RFID card
🔌
5m Tethered Type 2 Cable
Attached 5m cable for convenient everyday connection
⚡
Up to 7.4kW AC Charging
Practical single-phase charging for compatible home and light-use locations
  • Home EV Charging — Connected single-phase charging for suitable homes and everyday use.
  • Apartment Charging — May suit selected apartment and shared-parking projects, subject to approvals, access requirements and electrical design.
  • Connected Drivers — Suitable for customers who value supported app functions, RFID access and charging visibility.
  • Selected Light-Use Sites — May suit small workplaces where the confirmed A07 configuration meets operational requirements.
  • Suitable Installation Locations — Manufacturer-rated IP65 and IK10, subject to site assessment and installation method.

  1. Arrive and connect — park within reach and connect the attached 5m Type2 cable to a compatible vehicle.
  2. Start in the way that suits you — use the supported app or RFID method available with the supplied configuration.
  3. Check charging information — view supported status and charging information through the available interface or connected service.
  4. Finish and store neatly — stop charging using the configured method, disconnect the vehicle and return the cable to its holder.

  • Autel Charge App — Supports compatible charging control and monitoring functions.
  • RFID access — Allows charging access using supported RFID credentials.
  • Auto Start and scheduled charging — Available with the supplied configuration.
  • Wi-Fi and Bluetooth — Support compatible setup and connected functions.
  • Autel Charge Cloud — Manufacturer-listed cloud capability; availability depends on account, service and region.
  • OCPP — OCPP 1.6J and 2.0.1 are listed; implementation, firmware and backend compatibility must be confirmed for the exact unit.

Available functions depend on exact hardware, firmware, account, network, backend, subscription and regional availability.

The standard package includes the charging unit, wire box, standard mounting components and manufacturer documentation. An RFID card is included only with selected configurations.

Final package contents, cable length, display, accessories and communications hardware follow the accepted GridPilot order confirmation.

Manufacturer material lists:

  • AC 30mA + DC 6mA residual-current and ground-fault detection
  • Over-current protection
  • Overvoltage and undervoltage protection
  • Over-temperature fault handling
  • Integrated surge-protection functions
  • Automatic disconnection if connector is removed during charging
  • Manufacturer-rated IP65 enclosure
  • Manufacturer-rated IK10 impact resistance

These charger-level functions do not replace site-specific circuit design, upstream protection, earthing, isolation, testing or any requirements determined by the responsible New Zealand electrical worker.

Professional installation required.

This hardwired charger must be installed, grounded, configured, tested and commissioned by an appropriately licensed New Zealand electrical worker. Final circuit design, protection, cable sizing and mounting depend on the site.

Refer to the manufacturer installation manual for full positioning, wiring, earthing, commissioning and safety requirements.

Charging ModeMode 3 AC charging
Maximum PowerUp to 7.4kW AC charging
Rated Current32A charging capacity
Input VoltageDesigned for suitable 230V single-phase properties
Frequency50/60Hz operation
PhaseSingle-phase AC charging
ConnectorType 2 connector for compatible vehicles
Cable LengthAttached 5m cable for practical parking layouts
IP RatingManufacturer-rated IP65 enclosure for suitable locations
IK RatingManufacturer-rated IK10 impact resistance
MountingWall-mounted, with optional pedestal subject to confirmation
DimensionsApprox. 315 × 170 × 117mm
WeightApproximately 5.8kg
Operating Temperature–30°C to +50°C
Storage Temperature–40°C to +70°C
Operating Altitude≤2,000m
RCD ProtectionIntegrated AC 30mA + DC 6mA detection
Can it be controlled with an app?
Yes. Supported Autel Charge App functions include start, stop and charging schedules. Availability depends on the exact hardware, firmware, account, network and region.
Does it support RFID?
RFID access is supported where included with the supplied configuration. Confirm the credentials and package contents included with the accepted order.
Will it always charge at 7.4kW?
No. Actual charging power depends on the vehicle's onboard charger limit, available site capacity, installation design, battery conditions and operating temperature.
Is installation included?
No. GridPilot supplies the charging equipment but does not supply or invoice electrical installation. Installation is separately assessed, quoted, contracted, invoiced, completed, tested and certified by an independent licensed electrical contractor engaged directly by the customer.
What vehicles is it compatible with?
The A07 is designed for compatible Type 2 vehicles. Confirm the vehicle connector and onboard AC charging limit before purchase. Adapters and extension-cord sets are not permitted.
What warranty applies?
Warranty details will be confirmed once the applicable New Zealand provider, duration, coverage and claim process are established. Any applicable warranty is additional to rights and remedies that cannot lawfully be excluded under New Zealand law.
Product Flyer